 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Issue: 01 Specification AXE10-14 Oscillator type : PXO for WLAN Test Equipment Parameter Frequency range Standard frequencies Frequency stability Initial tolerance vs. temperature in operating frequency range (steady state) vs. supply voltage variation vs. load change long term (aging) 1st year Frequency adjustment range Mechanical (internal trimmer) Electronic Frequency Control (EFC) range EFC voltage VC EFC slope (f / VC) EFC linearity EFC input impedance Absolute pull range (APR) over 10 years, see Note 2 RF output Signal waveform Load Rise & decay time Symmetry (duty cycle) Start-up time Phase noise @ 63 MHz [100 MHz] Date: 2004-03-24 min. typ. max. Unit MHz MHz ppm ppm ppm ppm ppm ppm ppm ppm V % k ppm ppm Condition 22.000 / 40.000 2 5 0.2 0.1 1 0~+50C @ 40C N.A. N.A. N.A. 10 HCMOS 15 40 -95 -125 -135 -140 -145 3.0 5 60 4 Supply voltage VS Current consumption (steady state) Enable/disable function Operable temperature range Storage temperature range Enclosure (see drawing) Weight Packing ESD Sensitivity 2.85 -45 -55 3.15 30 pF ns % ms dBc dBc dBc dBc dBc V mA C C mm gram V @ VS/2 10 Hz 100 Hz 1 kHz 10 kHz 100 kHz @ +25C +90 +105 14.4x9.5x6 max 3 Tape & reel IEC 60679-3 or 61837 IEC 60286-3 HBM as in IEC 610004-2 1500 Notes: 1. Terminology and test conditions are according to IEC standard IEC60679-1, unless otherwise stated GmbH & Co. KG Wasemweg 5 D-74821 Lobbach Germany AXE10-14 page 1(2) www.axtal.com fon: +49 (6261) 939834 fax: +49 (6261) 939836 E-mail: info@axtal.com Enclosure drawing Pin connections Pin # Symbol 1 N.C. 2 N.C. 3 GND 4 RF OUT 5 N.C. 6 Vs Function No Connection No Connection Ground RF Output No Connection Supply Voltage Environmental conditions Test Visual inspection, dimensions Sealing tests Solderability Resistance to soldering heat Shock Bump Free fall Vibration, sinusoidal Rapid change of temperature Dry heat Damp heat, cyclic Cold Climatic sequence Damp heat, steady state Endurance tests - ageing - extended aging IEC 60068 Part ... 2-17 2-20 2-27 2-29 2-32 2-6 2-14 2-2 2-30 2-1 1-7 2-3 IEC 61178-1 clause ... 4.5 4.6 4.8.2 4.8.3 4.8.8 4.8.6 4.8.9 4.8.7 4.8.5 4.8.11 4.8.12 4.8.13 4.8.14 4.8.15 4.9.1 4.9.2 Test conditions Enclosure styles as in IEC 60122-3, if applicable Gross leak: Test Qc, Fine leak: Test Qk Test Ta (235 5)C Method 1 Test Tb Method 1A, 5s Test Ea, 3 x per axes 100g, 6 ms half-sine pulse Test Eb, 4000 bumps per Axes, 40g, 6 ms Test Ed procedure 1, 2 drops from 1m height Test Fc, 30 min per axes, 10 Hz - 55 Hz 0,75mm; 55 Hz - 2 kHz, 10g Test Na, 10 cycles at extremes of operating temperature range Test Ba, 16 h at upper temperature indicated by climatic category Test Db variant 1 severity b), 55C/95% r.H., 6 cycles Test Aa, 2 h at lower temperature indicated by climatic category Sequence of 4.8.11, 4.8.12 st (1 cycle), 4.8.13, 4.8.12 (5 cycles) Test Ca, 56 days 30 days @ 85C 1000h, 2000h, 8000h @85C GmbH & Co. KG Wasemweg 5 D-74821 Lobbach Germany AXE10-14 page 2(2) www.axtal.com fon: +49 (6261) 939834 fax: +49 (6261) 939836 E-mail: info@axtal.com |
Price & Availability of AXE10-14
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |